6BASIC OPERATIONSSWITCHING POWER ON/ OFFPress to swtch the transcever ON.• A beep sounds and the dsplay llumnates. If the Power-on tone select s set to OFF,the beep wll not sound.• If the Transcever Password functon s programmed, “PASSWORD” wll appear on thedsplay. Refer to “Transcever Password”, on page 6.Press agan to swtch the transcever OFF.n Transceiver PasswordTo enter the password:1 Press / to select a dgt.• When usng a keypad, smply enter the password dgts and proceed to step 4.2 Press C> to accept the entered dgt and move to the next dgt.• Press A or # to delete an ncorrect dgt. Press and hold A or # to delete alldgts.3 Repeat steps 1 and 2 to enter the entre password.4 Press S or to confirm the password.• If you enter an ncorrect password, the transcever remans locked.ADJUSTING THE VOLUMEPress the Volume Up key to ncrease the volume. Press the Volume Down keyto decrease the volume.If Squelch Off has been programmed onto a key, you can use that functon tolsten to background nose whle adjustng the volume level.SELECTING A ZONE AND CHANNEL/GROUP IDSelect the desred zone and channel/group ID usng the keys programmed asZone Up/ Zone Down and CH/GID Up/ CH/GID Down.• You can program names for zones and channels/group IDs wth up to 10characters.n Home Channel/Group IDYou can select your Home channel/group ID by pressng Home CH/GID.Press the key a second tme to return to your prevous channel/group ID.n Direct Channel/Group IDYou can quckly select a commonly used channel/group ID by pressng DirectCH/GID 1 ~ Direct CH/GID 4. Press the same key a second tme to return toyour prevous channel/group ID (f the key assgnment Drect CH/GID return sconfigured as “Enabled”).