152 Press / (if the key assignment list selection is configured as “Enabled”) or/C> to select your desred scrambler code.3 Press S, , or to store the new settng.• After changng your scrambler code, be sure to nform all of your group members ofthe new code so they can also reset ther transcevers. The scrambler functon wllnot work wth transcevers set up wth dfferent scrambler codes.MONITOR/ SQUELCH OFFYou can use the key programmed as Monitor or Squelch Off to lsten to weaksgnals that you cannot hear durng normal operaton and to adjust the volumewhen no sgnals are present on your selected channel.• The con appears on the dsplay whle Montor or Squelch Off s actvated.Your dealer can program a key wth one of four Montor/Squelch Off functons:• Monitor: Press to deactvate QT, DQT, DTMF, 5-tone, or FleetSync Sgnalng. Pressagan to return to normal operaton.• Monitor Momentary: Press and hold to deactvate QT, DQT, DTMF, 5-tone orFleetSync Sgnalng. Release to return to normal operaton.• Squelch Off: Press to hear background nose. Press agan to return to normaloperaton.• Squelch Off Momentary: Press and hold to hear background nose. Release to returnto normal operaton.n Squelch LevelIf a key has been programmed as Squelch Level, you can readjust yourtranscever’s squelch level:1 Press the key programmed as Squelch Level.• The con appears on the dsplay, along wth the current squelch level.2 Press / (if the key assignment list selection is configured as “Enabled”)or /C> to select your desred squelch level from 0 to 9.3 Press S or to store the new settng.KEY LOCKPress the key programmed as Key Lock to lock the transcever front panel andmcrophone keys.• When any key s pressed whle Key Lock s actve, “LOCKED” momentarly appears onthe dsplay.Press the Key Lock key agan to unlock the keys.SIGNAL STRENGTHThe Sgnal Stength ndcator shows the strength of receved sgnals:Strong Sufficient Weak Very Weak