112 Press the key programmed as Selcall.3 Press / (if the key assignment list selection is configured as “Enabled”) or/C> to select the ID of the staton you want to call.• You can also enter the staton ID drectly by usng the keypad.4 Press the key programmed as Call 1 to Call 3 to begn your call.MY IDYour dealer can program an ID number for your transcever, to dentfy you toother partes when you make a call. If set by your dealer, you can edt the ID.1 If the ID number can be edted, t wll appear on the dsplay when you turn thetranscever power ON.2 Press or C> to select the dgt you want to change, then press / to ncrement/decrement the number.3 Press S or to complete the entry.TRANSMITTING1 Select your desred zone and channel.2 Press the key programmed as Selcall.3 Press or C> to select a dgt, then press / to ncrement/decrement thenumber.4 Press S to complete the entry.5 Press the key programmed as Call 1 to Call 3 and begn your conversaton.Note: Addtonally, you can also use the keys programmed as Digit 1x Down, Digit 1x Up,Digit 10x Down, and Digit 10x Up to adjust the Selcall number. Digit 1x Up/Down ncreases/decreases the Selcall number by 1 each tme the key s pressed. Digit 10x Up/Down ncreases/decreases the Selcall number by 10 each tme the key s pressed.RECEIVINGWhen you receve a sgnal contanng the correct tones, squelch opens and youwll hear the call. To respond to the call, press the PTT swtch and speak nto themcrophone.FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTIONFleetSync s an Alphanumerc 2-way Pagng Functon and s a protocol owned byKenwood Corporaton.Note: If set up by your dealer, your transcever may use the MDC-1200 feature n place ofFleetSync. MDC-1200 and FleetSync cannot be operated smultaneously.SELCALL (SELECTIVE CALLING)A Selcall s a voce call to a partcular staton or to a group of statons.
