Kenwood TR-50 Instruction Manual

Also see for TR-50: Instruction manual

5,OPERATIONM@ RECEIVE@) @ 2) Connect a microphone© Install the.battery.or.connect an external! supply.e Connect the supplied antenna or an external antenna.@ > Turn the POWER/VOL control clockwise to turn on power. The display should in-dicate ‘’60.00A‘’. Advance the POWER/VOL contro! clockwise until the desiredaudio level is reached.@) Turn the SQUELCH control to the ‘Threshold point’’. Refer to page 6 for instruc-tions how to use this control.® Select the desired operating frequency, using the procedures previously discuss-ed.@ TRANSMIT -Totransmit,firstselect thedesiredfrequencyandseewhetheritisbusyornot.Ifitisnotbusy,simplydepressthemicPTTswitchtotransmit.TheRF meterwillindicate therelativepoweroutput.Speakintothemicrophone.Theoptimumdistance fromyourmouth to the microphone is about 5 cm (3-4 inches).Speakingtooclosetothemicrophonewillmakeyourvoicedifficulttounderstand,at.the receiving station.Note:TheIFfrequencyisthesamefortransmitandreceiveintheTR-50.Note,thatwhentwo TR-50's-areoperatedcloselytogether,theymayinterferewitheachother,regardlessofthedialfrequencies.‘lLINITIALFREQUENCYSETTINGS(RESETVALUES)Whenthemicroprocessorismanuallyreset, orthe lithiumbatteryisreplaced,theresetvaluesof theVFO’sare asfollows:[CdFrmaueney[ise |VFO A1260.00 MHz“60.00R"'VFOB 1295.00 MHz “95,006*'14