Kenwood TR-50 Instruction Manual

Also see for TR-50: Instruction manual

MmMEMORYCHANNELENTRY1.M1-M4.(Simplexchannels}2 MS (Odd split channel)16ProcedureSelect the desired frequencyPressing the [M] key causes the » M an-nunciator to light, an audio tone to sound,and the display to sequentially displaychannel numbers that currently containdata.Frequency ‘selec- }Main dial, MICtion UP/DWNFunction selectionia Depress the key corresponding to thedesired memory channel.Memory channelselectionA morse code ‘‘R’’ will sound to indicatethat the channel has accepted the data.If a channel is selected that allready con-tains data, an error tone of 3 beeps willsound. If you wish to rewrite the data that|had been previously stored, press the cor-responding key again. The ‘'R’’ shouldsound.ProcedureReceive frequency | Main dial, MicselectionSelect the desired receive frequency.Pressing the [M] key causes the » M an-| nunciator to light, an audio tone to soundL_] and the display to sequentially displaychannel numbers that currently have datastored in them. ,Press the M5 key.A: single beep will sound, to indicate thatC5] the recieve frequency has been accepted.| If the error signal appears, 3 beeps, andyou want to change the frequency that wasstored before press the M5 key again.2 |Function selection3° |Memory channelselectionMain dial, Mic |A series of 4 beeps will sound after theUP/DWN receive frequency has been entered (step3). Select the desired transmit frequency.Transmit frequen-cy selectionPress the M5 key to store the transmit fre-quency. A morse code ‘‘R’’ will sound tosignal data storage.Transmit frequen-cy entry