Kenwood TS-2000 Instruction Manual

Also see for TS-2000: Instruction manual Instruction manual Service manual Specifications Service manual

Contents

Kenwood TS-2000 Instruction Manual Manual pdf 56 page image

4810 SUB-RECEIVERAUTOMATIC SIMPLEX CHECK (ASC)You can also use ASC functions on the 144 MHz and430 (440) MHz bands of the sub-receiver. Whileusing a repeater, ASC periodically monitors thestrength of the uplink frequency to check the signals.Press and hold [TF-SET] until “[R]” appears on theSUB band display. Refer to “AUTOMATIC SIMPLEXCHECK” {page 34} for function and control details.TRANSMITTING A TONEYou can assign another Tone to the sub-receiver.Refer to “TRANSMITTING A TONE” {page 33} forfunction and control details.MEMORYYou can also utilize all the memory functions {page 58},including the Quick Memory function {page 64}, whileyou are operating the sub-receiver. However, theoperating frequency range is limited to the sub-receiver’s frequency coverage. You cannot recall anymemory channels that are outside the sub-receiver’sfrequency coverage. These channels are automaticallyskipped when they are recalled on the sub-receiver.