Kenwood TS-590SG Setting Manual

Also see for TS-590SG: Reference guide Setting manual Instruction manual Manual Instruction manual

Contents

124.3. Transceiver SettingsMake the settings required to implement KNS operations using transceivers.● Set the transmitting audio path settingsWith KNS operations, normally transmitted audio is input from an ACC2 connector.Input is also possible using USB audio functions from a USB connector, but as thedelays are great, this is not recommended.Make the following menu settings to transmit audio input from the ACC2 connector.Menu No. Function Set value69 Audio input line selection for datacommunicationsACC2The default setting is ACC2.Reference:Set the menu described above to USB to transmit USB audio signals input to theUSB connector.Set a playback device and recording device to the device connected to theTS-590SG as a default using the Windows sound settings of the host station.● Data VOX settingsWith the TS-590SG, VOX functions can be implemented using either audio input to theACC2 connector or USB audio signals input to the USB connector, but to preventunintentional transmission during KNS operations, turn OFF the function using themenu settings.Menu No. Function Set value76 VOX operation with data input OFFThe default setting is OFF.Caution: There is a risk that sounds other than those produced by the PC may betransmitted unintentionally over the network, so we recommend that you turn offthis function. When this function is ON, be aware that all sounds created by the PC other thanthe intended audio transmissions are also transmitted. When using this function for the first time, we recommend connecting a dummyload to the TS-590SG to perform checks and adjustments.