Kenwood TS-890S Setting Manual

Also see for TS-890S: Instruction manual Command reference guide In-depth manual Manual Service bulletin

Contents

12to the operation manual of the TS-890S.3.3. Setting and operation of ARCP-890 for remote control by LAN connection3.3.1. PC operating environmentWhen operating remotely via LAN connection, the operating environment required for the PCrunning ARCP-890 is as follows.Table 3.9 PC operating environmentOperating System (OS)* Windows 10 (version 1703 (OS Build 15063.0) or later, 32-bit or64-bit version)Windows 8.1 (RTM or later, 32-bit or 64-bit version)Windows 7 (Service Pack 1 or later, 32-bit or 64-bit version)Processor Faster than the recommended CPU for OS on which you areoperatingSystem Memory (RAM) RAM having the System Memory recommended by the respectiveOS used in your PC or largerFree Hard Disk Space 100 MB or more of free hard disk spaceSoftware Microsoft .NET Framework 4.7 (including .NET Framework 4.0)Peripheral Devices Displays with resolutions higher than SXGA (1280 x 1024)Keyboard, mouse or other pointing devicesUSB 2.0 port or RS-232C interfaceNetwork functionAvailable networking environment (LAN or high-speed broadband)* Applicable operating systems are subject to change without notice due to the end of thetechnical support by Microsoft Corporation or change of the product specifications.3.3.2. Installing ARCP-890Download and install the ARCP-890 to the PC from the KENWOOD website:http://www.kenwood.com/i/products/info/amateur/software_download.htmlFor the installation method, refer to the guide on the download page.3.3.3. Settings for connecting to TS-890SFollow the procedure below to make settings for connecting to TS-890S.