Kenwood TS-890S Setting Manual

Also see for TS-890S: Instruction manual Command reference guide In-depth manual Manual Service bulletin

Contents

83.2. TS-890S settings for remote operation by LAN connection3.2.1. Administrator settingsWhen remote control by LAN connection, login authentication is necessary so as not to beoperated by others. For authentication, you must set the information of the administrator(usually the owner of the TS-890S) in TS-890S. Set the following items in KNS menu. Forthe operation method, refer to the operation manual of the TS-890S.Table 3.1 Administrator settingsKNS Menu Item1 Administrator ID2 Administrator Password3.2.2. Registering KNS UsersIt is also assumed that TS-890S will be used by someone other than the administrator (e.g.someone in the family) by remote control via LAN connection. In that case, if theadministrator registers information of other users, the registered KNS users can also beremotely controlled.The KNS user registers with the KNS user list of the TS-890S. The items to register are asshown in the table below. Up to 100 people can be registered. For the operation method,refer to the operation manual of the TS-890S.Table 3.2 KNS User settingsItem RemarksUser Name RequiredPassword RequiredDescription Description about this user (optional)RX Only Reception operation is permitted to this user.(transmission is prohibited)Disabled Temporarily prohibit access for this user.3.2.3. Setting the built-in VoIPIn the KNS menu, set the built-in VoIP function to "On". For the operation method, refer tothe operation manual of the TS-890S.