Kenwood VR-7070 Instruction Manual

Also see for VR-7070: Service manual Service manual

Kenwood VR-7070 Instruction Manual Manual pdf 28 page image

28 ENPresetting radio stations manuallyMULTI CONTROLMEMORYTUNER1Tune to the station you want to store.2Press the MEMORY key while receiving the station.Blinks for 5 seconds Lights for 5 secondsLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYSTEREOTUNEDSurround EXMEMORYProceed to step 3 within 5 seconds.(If more than 5 seconds elapse, press the MEMORY key again).3Use the MULTI CONTROL knob or Multi (%/ fi) keys toselect one of the station presets (1 – 40).4Press the MEMORY key again to confirm the setting.• Repeat steps 1, 2, 3, and 4 to store as many stations asnecessary.• If you store a station at a previously used preset, the old station willbe replaced by the new one.Listening to radio broadcastsThe receiver can store up to 40 stations in the memory and recall themby one-touch operation.Tuning radio stationsBAND MULTI CONTROLTUNER AUTO(Multi %/ fi)AutoTune – 1Tune + ¡TUNERBand1 Use the TUNER key to select the tuner.2 Use the BAND key to select the desired broadcast band.Each press switches the band.LSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EX3 Use the AUTO key to select the desired tuning method.Each press switches the tuning method to either auto or manualtuning.“AUTO” indicator lights up in the display.CAL 6CH INPUTXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIAUTO DETECT THX RDSRTYMEMOSTEREOTUNEDSurround EXAUTO• Normally, set to “AUTO” (auto tuning). If the radio waves are weakand there is a lot of interference, switch to manual tuning. (Withmanual tuning, stereo broadcasts will be received in monaural.)4 Use the MULTI CONTROL knob or Multi (%/ fi) keys, orTune – 1/ + ¡keys to select the station.“STEREO” lights when a broadcast is being received in stereo.TICAL 6CH INPUTAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIAUTO DETECT THXAUTORDSRTYMEMOSurround EXSTEREOTUNED“TUNED” is displayed when a station is received.Auto tuning : The next station is tuned automatically.Manual tuning : Turn the knob or use the Multi (%/fi) keys toselect the desired station.