Kenwood XD-853 Instruction Manual

Also see for XD-803: Instruction manual

Contents

Kenwood XD-853 Instruction Manual Manual pdf 24 page image

24Basic sectionLet's have soundA tip for the use of the tape counterThe tape counter is set to “0000” when a cassette tapeis loaded. In case you want to interrupt recording(playback) in the middle of the tape, the counter read-ing will be helpful as a reference for locating the sameposition when continuing the recording (playback)the next time. The tape counter figure decrementsduring recording or playback of the reverse side(while the 2 tape transport indicator is lit).To set the tape counter to “0000”, open the cassetteholder once. Then the counter will be reset.Relay play÷ Relay play is not possible in the reverse modes “ ”and “ ”.÷ If a tape is loaded only in either deck, playback stopsafter having played both sides of the tape.When tapes are set in the decks A and B and the re-verse mode is set to “ ” (play of both sides), play ofthe second deck will be started automatically afterplay of the first deck has been completed. Tape playwill be repeated alternately.AAT 0A P E 0 0 0