Kenwood XD-853 Instruction Manual

Also see for XD-803: Instruction manual

Contents

Kenwood XD-853 Instruction Manual Manual pdf 25 page image

25Basic sectionLet's have soundCHANNELSPACE freq.Area12USA, Canada and SouthAmerican countriesOther countriesFM : 100 kHzAM : 10 kHzFM : 50 kHzAM : 9 kHzThe space between radio channels has been set to theone that prevails in the area to which the system isshipped. However, if the current channel space settingdoes not match the setting in the area where the sys-tem is to be used, for instance when you move fromarea 1 or area 2 shown in the following table or viceversa, proper reception of AM/FM broadcasts cannotbe expected. In this case, change the channel spacesetting in accordance with your area by referring to thefollowing table.1 Select the TUNER input.2 While holding the TUNER (BAND) key de-pressed, turn the MULTI CONTROL jog dial toselect the system mode.÷ The “AM” display is variable depending on the model(country or area), and “MW” may be displayed insome areas.1 “FM100/AM10 kHz” STEP,2 “FM 50 /AM 9 kHz” STEP,F 0M 1 0 0 / A M 1 F 9M 5 0 / A MMULTICONTROLCHANNEL SPACE setting(Except for the U.S.A., Canada, U.K., Europe, and Australia)