Kenwood XD-8550/8050 Instruction Manual

Also see for XD-6000: Instruction manual Instruction manual

Contents

Kenwood XD-8550/8050 Instruction Manual Manual pdf 53 page image

XD-8550/XD-6000 (En/T)5 3Preparation sectionBasic sectionApplication sectionKnowledge sections132When you want to record a track being played, press the O.T.E. key.Play a CD.To end recording in the middleAt the time of CD playback, any desired title can be selected immediately for recording.When recording sound from the MD recorder to a cassette deck, be sure to read the instruction manual of the optional MDrecorder (DM-F70).Recording only desired titles (ONE TOUCH EDIT.....single title recording)When equalizer or another effect is applied to thesound, the sound with the applied effect can be re-corded. PConvenient CD recording6CD TAPEMD TAPEO.T.E.÷ Playback restarts from the beginning of the track being played andrecording starts at the same time.÷ Both the cassette deck and CD player stop.Preparation ¤1 Load a cassette tape in deck B.2 Select the tape transport direction (2 or 3).3 Select “””,“[” (two-side recording).4 Select the Dolby NR mode.5 Select the “CD” input.6 Insert disc(s) in the CD player.7When recording has been completed, a non-recorded portion of4 seconds will be produced and the cassette deck part will stop.The CD player will enter temporary stop condition.To record a different track, repeat the steps 2 and 3.If you record a CD using the SRS 3D system, it is recom-mended to use the CCRS.NoteNoteCD TAPEMD TAPEO.T.E.X-H5Lights