XD-8550/XD-6000 (En/T)6 6Preparation sectionBasic sectionApplication sectionKnowledge sectionsAdjust the clock before setting the timer.Set the POWER switch to OFF (STANDBY) position.Adjust the listening volume.Make preparations for the play (recording).÷ When recording radio, the listening volume is automatically set to theminimum volume at the moment the power is turned ON by the timer.DP-MH5 only:The CD should be loadedin tray No. 1 so that it canbe played by the timer.÷ Timer reservation is possible for the two types PROG.1 and PROG. 2at the same time.÷ Please make reservations with an interval of at least one minute, so thatthe operation times of PROG. 1 and PROG. 2 do not overlap.Timer programmingTwo 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) are available.In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected tobe activated or not as required.123Adjust the clock before setting the timer.The B deck has priority atthe time of timer playback.Timer operationSelect a program No.4÷ The selected program No. lights.÷ If a program No. under which a timer program has already beenreserved, it is replaced by the new timer program.1VOLUME5∞2Within 8 seconds!ENTERAUTO M.MUTE12PROG. N.B.1 2 3 4 511 12 13 14 1516 17 18 19 206 7 8 9 10Each press of the key switches the program numbers as follows.1 PROG.1 ....... Program 12 PROG.2 ....... Program 23 Normal operationEX.BASSFor recordingMake prepara-tions for record-ing. ¤Playing the auxiliary inputsourceMake timer setting ofthe component con-nected to the AUX orMD jacks.To listen to tapeSet a tape into deck B.To listen to CDInsert a disc.(Program playback isnot possible.)To listen to radioThe station should bepreset prior to theabove. ⁄PROG.PGM MEMO EDITSPACE TOTAL ST.DISC ALL AUTOTUNED1 2C-H6displayC-H5displayLights Lights