Kenwood XD-V555 Instruction Manual

Also see for XD Series: Instruction manual Instruction manual Instruction manual

Kenwood XD-V555 Instruction Manual Manual pdf 15 page image

15 ENTo remove the CDs :Whilst in the stop mode, press the 0 OPEN/CLOSEbutton.• The disc tray will open. Remove the two discs.Then, press the DISC SKIP button to rotate thedisc tray and remove the remaining disc.• If the disc cannot be removed after the disc trayopens, close the disc tray and re-open it again.After use :Press the ON/STANDBY button to enter thestandby mode.Note :• Whilst in the “VCD ON” mode, no sound can beproduced if you playback audio CDs.To switch to “VCD AUTO” mode, press the VCDAUTO button during stop mode.Cautions :• Do not carry the unit with discs left in the disctrays. The disc may get displaced inside theunit and damaged or cause damage to theunit. This may also cause malfunctions.• Do not place two CDs in one disc position.• Do not push the disc tray whilst it is moving.• Do not attempt to turn the disc tray by hand.This may cause malfunctions.• If the power fails whilst the tray is open, waituntil the power is restored.• If the disc tray is stopped forcibly, “ER-CD10”will appear in the display and the unit will notfunction.If this occurs, press the ON/STANDBYbutton to enter the standby mode and thenturn the power on again.• If TV or radio interference occurs during CDoperation, move the unit away from the TV orradio.• If a disc is damaged, dirty, or loaded upsidedown, the disc will be skipped and the nextdisc will automatically play.Direct search system1 Press the DISC SKIP button to activate the “TOCREAD” process for every disc in the disc tray.2 Press the disc number button (DISC 1 - DISC 3)button to select the desired disc.3 Use the numeric buttons to select the desiredtracks.• The numeric buttons can be used to select upto 9 track numbers for play. When selecting 10or more track numbers, use the “+10” button.A. For example, to choose 13Press the “+10” button and “3” button.B. For example, to choose 30Press the “+10” button three times and “0” buttononce.4 Press the 3 (3/SELECT) button to start the play-back.Notes :• The selected track will be played automaticallywhen you press the numeric buttons during play-back. (It is not necessary to press the 3 (3/SELECT) button.)• During random playback, direct search systemis not possible.• DISC SKIP and DISC 1 - DISC 3 buttons cannotfunction during “TOC READ” and disc tray rota-tion.24341