Kenwood XD-V555 Instruction Manual

Also see for XD Series: Instruction manual Instruction manual Instruction manual

Kenwood XD-V555 Instruction Manual Manual pdf 9 page image

9 ENTV/monitor connectionIf the TV/monitor has a video input, connect it toVIDEO OUT socket on the rear panel of the unit.Note :• If the TV/monitor does not have a video input,the VIDEO OUT socket on the unit should beconnected to a VCR with a video input, which inturn should be connected to the TV/monitorthrough the TV ANTENNA/CABLE input. (Be sureto turn on the VCR, and set the VCR’s input modeto “Auxiliary”)Antenna connectionSupplied FM antennaConnect the FM antenna wire to the FM 75 Ω ter-minal and position the FM antenna wire in the di-rection where the strongest signal can be received.Supplied AM loop antennaConnect the AM loop antenna wire to the AM LOOPsocket. Position the AM loop antenna for optimumreception.Place the AM loop antenna on a shelf, etc., or at-tach it to a stand or a wall with screws (not sup-plied).Notes :• Do not place the antenna on the main unit as itmay result in noise pick up from the internal dig-ital electronics.Place the antenna away from the unit for betterreception.• If the AM loop antenna and the FM antenna wireare placed near to the AC power cord, interfer-ence may result.External FM antennaUse an external FM antenna if you require betterreception.Consult your dealer.Note :• When an external FM antenna is used, discon-nect the supplied FM antenna wire.FM antenna AM loopantennaExternal FM antennaVIDEO OUTVideo cableTo Videoinput socket