Kenwood XD-V555 Instruction Manual

Also see for XD Series: Instruction manual Instruction manual Instruction manual

Kenwood XD-V555 Instruction Manual Manual pdf 19 page image

19 ENRADIO OPERATIONTuning1 Press the ON/STANDBY button to turn thepower on.2 Press the TUNER (BAND) button to select thedesired frequency band. (FM ST, FM or AM)3 Press the TUNING/TIME (%UP or fiDOWN) but-ton to tune into the desired station.Manual tuning :Press the TUNING/TIME (%UP or fiDOWN) buttonas many times as required to adjust the frequencyshown on the display to the frequency of the de-sired station.Auto tuning :When the TUNING/TIME (%UP or fiDOWN) buttonis pressed for more than 0.5 second, scanning willstart automatically and the tuner will stop at thefirst receivable broadcast station.Notes :• When radio interference occurs during auto scantuning, auto scan tuning may stop automaticallyat that point.• If a weak station signal is found during auto scantuning, the station will be skipped.• To stop the auto tuning, press the TUNING/TIME(%UP or fiDOWN) button again.4 To receive an FM stereo transmission, press theTUNER (BAND) button so that the “ST.” indica-tor on the display lights up.• “ ” will light up on the display when an FMbroadcast is tuned in stereo.5 If the FM reception is weak, press the TUNER(BAND) button so that the “ST.” indicator goesoff.• The reception changes to mono, the sound be-comes clearer.After use :Press the ON/STANDBY button to enter thestandby modeNote :• The last station turned in will be recalled, evenafter changing the tuning band or the function,or after switching the unit to the standby mode.312,4,52,4,531