14 | EnglishGeneral featuresEqualizer Control1 Select the source to adjustPress the [SRC] button.Refer to (page 8).2 Enter Equalizer Control modeUsing the Control knob, select "DSP" > "SNDCONT" > "EQ".For the operation method, refer to Control mode> (page 11).3 Select the Equalizer Control item to adjustTurn the Control knob or push it towards leftor right.Icon Equalizer Control Item"PRESET" System Q Setting"FRONT" Equalizer Front Setting"REAR" Equalizer Rear Setting4 Enter the Equalizer Control itemPress the Control knob.5 Adjust the Equalizer control itemSystem Q SettingTurn the Control knob or push it towards leftor right.Each time you push the knob, the setting alternatesbetween the settings shown in the table below.Display Sound setting"User"/ "Natural"/ "Rock"/ "Pops"/"Easy"/ "Top40"/ "Jazz"User/ Natural/ Rock/ Pops/ Easy/Top 40/ Jazz⁄• User memory:The values set on the Rear Setting>.• To get the best sound, first go through Management system> (page 12).Equalizer Front Setting/Equalizer Rear Setting1 Select a frequency band you wish to adjust.Turn the Control knob or push it towards leftor right.Each time you push the knob, the band alternatesbetween "1" (Band 1) and "4" (Band 4).2 Select the items to adjust for Equalizer.Push the Control knob towards up or down.Each time you push the knob, the item to beadjusted alternates between the items shown inthe table below.3 Adjust the Equalizer.Turn the Control knob or push it towards leftor right.Each time you push the knob, the settingalternates between the settings shown in thetable below.Display Equalizer adjustment item Range"F0" Equalizer Front Center Frequency/Equalizer Rear Center FrequencyRefer to thefollowings."Q" Equalizer Front Quality/Equalizer Rear Quality0.25/ 0.50/ 1.00/2.00"Gain" Equalizer Front Level/Equalizer Rear Level–9/ -7/ -5/ -3/ -2/-1/ 0/ +1/ +2/ +3/+5/ +7/ +9"Effect" Equalizer Front Effect/Equalizer Rear Effect(BAND1 only)OFF/ ON⁄• The frequency which can be selected by each Frequencyband is shown below.Band FrequencyBand1 60/ 80/ 100/ 120/ 160/ 200 HzBand2 250/ 315/ 400/ 500/ 630/ 800/ 1k HzBand3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 kHzBand4 5/ 6.3/ 8/ 10/ 12.5/ 16 kHz• "Effect"Amplifies the range lower than the center frequency aswell as the low center frequency.4 Exit frequency band.Press the Control knob.6 Exit Equalizer Control modePress the [FNC] button.WOW HD Control1 Select the source to adjustPress the [SRC] button.Refer to (page 8).2 Enter WOW HD Control modeUsing the Control knob, select "DSP" > "SNDCONT" > "WOW HD".For the operation method, refer to Control mode> (page 11).
