Kenwood eXcelon KDC-X991 Instruction Manual

Also see for KDC-X991 - Excelon CD Receiver: Training guide Firmware update guide Installation manual Instruction manual Service manual

Kenwood eXcelon KDC-X991 Instruction Manual Manual pdf 48 page image

48 | EnglishIn Standby modeBuilt-in Amp SettingControlling the built-in amplifier.Turning OFF this control enhances the preoutquality.Display Setting"AMP : ON" The built-in amplifier activates."AMP : OFF" The built-in amplifier deactivates.Other than Standby mode/When the Dual Zone System is ONDual Zone System SettingSetting the Front channel and Rear channel soundin the Dual Zone System.Display Setting"Zone 2 : Rear" Sub source (Auxiliary input source) is to be rearchannel."Zone 2 : Front" Sub source (Auxiliary input source) is to be frontchannel.Other than Standby modeB.M.S. (Bass Management System)Adjust the bass boost level of the external amplifierusing the main unit.Display Setting"AMP Bass : Flat" Bass boost level is flat."AMP Bass : +6" Bass boost level is low (+6dB)."AMP Bass : +12" Bass boost level is mid (+12dB)."AMP Bass : +18" Bass boost level is high (+18dB).⁄• Refer to the catalog or instruction manual for poweramplifiers that can be controlled from this unit.• For amplifiers, there are the models you can set from Flatto +18 dB, and the models you can set from Flat to +12dB.When an amplifier that can only be set to +12 isconnected to the unit, "AMP Bass : +18" will not workcorrectly even if it is selected.Other than Standby modeB.M.S. Frequency OffsetSetting the central frequency, boosted by B.M.S.Display Setting"AMP FREQ : Normal" Boost with the normal central frequency."AMP FREQ : Low" Drop the normal central frequency 20%.Menu systemIn Standby modeContrast AdjustmentAdjusting the display contrast.Display and Setting"Contrast : 1"…"Contrast : 4" (Original setting)In Standby modeDisplay-reversing SettingIf no operation is performed for a predeterminedperiod of time, switching between negative andpositive display modes takes place automatically.Display-reversing maintains the initial brightness ofthe display for a long period of time.Display Setting"Display N/P : Auto" Auto reverse display"Display N/P : POSI" Positive display only⁄• Switching between negative and positive display maynot take place depending on the displayed mode.