Kenwood eXcelon KDC-X991 Instruction Manual

Also see for KDC-X991 - Excelon CD Receiver: Training guide Firmware update guide Installation manual Instruction manual Service manual

Kenwood eXcelon KDC-X991 Instruction Manual Manual pdf 32 page image

32 | EnglishFast Forwarding and ReversingFast ForwardingHold down toward [¢] with the Control knob.Release to resume the playback.ReversingHold down toward [4] with the Control knob.Release to resume the playback.⁄• There is no sound while the Audio file is being searched.Music SearchSwitching between music contained in the disc orfolder being played now.Push the Control knob towards [4] or [¢].Function of disc changer/ Audio fileDisc Search/Folder/Album SearchSwitching between folders/albums contained in thedisc changer, media, or device being played now.Push the Control knob towards up or down.⁄• Disabled when "RESUMING" is displayed on the iPod.Function of remote controlDirect Music SearchDoing Music Search by entering the music number.1 Enter the music numberPress the number buttons on the remotecontrol.⁄• You can select Direct music Search up to 999.2 Do music SearchPress the [4] or [¢] button.Cancelling Direct Music SearchPress the [38] button.⁄• This function is not available on iPod and the musicedited by "Music Editor".Function of disc changers with remote controlDirect Disc SearchDoing Disc Search by entering the disc number.1 Enter the disc numberPress the number buttons on the remotecontrol.2 Do Disc SearchPress the [FM+ ] or [AM–] button.Cancelling Direct Disc SearchPress the [38] button.CD/Audio file (USB/iPod/Internal Memory) control featuresDrive SearchSelecting the device inserted in the Multi CardReader.1 Put the playback to pausePress the Control knob.2 Select a devicePush the Control knob towards up or down.3 Restart playbackPress the Control knob.⁄• This unit is compliant with Multi Card Readers with amaximum of 4 slots.• If a device is inserted during connection of the MultiCard Reader, it is not recognized. Select the Removemode with reference to (page 31), remove the Card Reader, and then insert thememory.