Kenwood kdc-bt420u Instruction Manual

ENGLISH 17AUDIO SETTINGSWhile listening to any source...1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [AUDIO CONTROL], then press the knob.3 Turn the volume knob to make a selection (see the following table), then pressthe knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.(or using RC-406)1 Press AUD to enter [AUDIO CONTROL].2 Press J / K to make a selection, then press .To return to the previous setting item, press .Default: XXSUB-W LEVEL –15 to +15 (0) Adjusts the subwoofer output level.BASS LEVEL –8 to +8 (+6)Adjusts the level to memorize for each source. (Before making anadjustment, select the source you want to adjust.)MID LEVEL –8 to +8 (+5)TRE LEVEL –8 to +8 (0)EQ PROBASS ADJUST BASS CTR FRQ 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency.BASS LEVEL –8 to +8 (+6): Adjusts the level.BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.MID ADJUST MID CTR FRQ 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency.MID LEVEL –8 to +8 (+5): Adjusts the level.MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.TRE ADJUST TRE CTR FRQ 10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center frequency.TRE LEVEL –8 to +8 (0): Adjusts the level.PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/EASY/ JAZZ/ NATURAL/ USER: Selects a presetequalizer suitable to the music genre. (Select [USER]to use the customized settings.)[DRIVE EQ] is a preset equalizer that reduces noiseoutside the car or running noise of the tyres.BASS BOOST LEVEL1/ LEVEL2/ LEVEL3: Selects your preferredbass boost level. ; OFF: Cancels.LOUDNESS LEVEL1/ LEVEL2: Selects your preferred low and highfrequencies boost to produce a well-balanced soundat a low volume level. ; OFF: Cancels.SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ;85HZ/ 120HZ/ 160HZ: Audio signals withfrequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sentto the subwoofer.SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase ofthe subwoofer output to be in line with the speakeroutput for optimum performance. (Selectable onlyif a setting other than [THROUGH] is selected for[LPF SUBWOOFER].)HPF THROUGH: All signals are sent to the speakers. ;100HZ/ 120HZ/ 150HZ: Audio signals withfrequencies higher than 100 Hz/ 120 Hz/ 150 Hz aresent to the speakers.