Keysight Technologies 33210A Service Manual

Also see for 33210A: User guide

Contents

Keysight Technologies 33210A Service Manual Manual pdf 37 page image

Front-Panel Menu Operation 3Keysight 33210A Service Guide 37Front-Panel Menu ReferenceThis section gives an overview of the front-panel menus. The remainder of thischapter contains examples of using the front-panel menus.Configure the modulation parameters for AM, FM, and PWM.– Select the modulation type.– Select an internal or external modulation source.– Specify AM modulation depth, modulating frequency, and modulation shape.– Specify FM frequency deviation, modulating frequency, and modulation shape.– Specify PWM deviation, modulating frequency, and modulation shape.Configure the parameters for frequency sweep.– Select linear or logarithmic sweeping.– Select the start / stop frequencies or center / span frequencies.– Select the time in seconds required to complete a sweep.– Specify a marker frequency.– Specify an internal or external trigger source for the sweep.– Specify the slope (rising or falling edge) for an external trigger source.– Specify the slope (rising or falling edge) of the “Trig Out” signal.