Getting Started with the @Znh^\]i 81133A and 81134ANow that you have unpacked the instrument and plugged it in,let´s take a look at the main elements of the front panel.Switch on the instrument. You can immediately start playing with the settings.Start by pressing the tab keys. You see that only the lower part of the panel pagechanges. You can switch between five panel pages, which allow you to setparameters for different instrument settings.The parameters at the upper part of the panel page are valid for the whole instrument.4Main PageChannel PageData Page Aux PageNavigate through the pages with the Tab KeysTab Keys to navigatebetween the pagesNavigation knobSoftkeys Numeric KeysChannel-specificinputs and outputsGlobal inputsandoutputsConfig Page

safety summary

setting up a data pattern

Keysight Technologies 81133A Getting Started Manual

81133A

Safety Summary

Before Applying Power

Initial Inspection

Power Requirements

Cleaning Recommendation

Declaration of Conformity

Benefits and Key Features

Front Panel Overview

Input and Outputs

Rear Panel Overview

Navigation through the

How to Navigate through the Parameters at one

How to Change a Number Field

Setting Up a Clock Signal

Using the Graphical User Interface

Keysight 81133A/81134A Pulse Generator User's Guide, April

Using the Remote Programming Interfaces

Setting Up a Pulse Signal

Setting Up a Data Pattern

Setting Up a Burst Signal

Setting Up a Repetitive Burst Signal

Measurement

Connecting the Instruments

Setting Up the 81134A by Using the Graphical User Interface

Setting Up the 33250A Waveform Generator

Play with the Settings

Using the Keysight 81133A/81134A Pulse Generator

Pages of the User Interface

Combining Parameters for Signal Generation

Pattern Modes

Signal Modes

Variable Crossover

Clock Sources

Start Mode

Timing of Generated Signals

Clock

Pulses

Data Pattern

PRBS

Started Burst

updating the firmware

troubleshooting

81134A