Keysight B1505A User’s Guide, Edition 12 5-41Measurement ExamplesTemperature Controlled by ThermoStreamPreparing Temperature Control and MeasurementSetupsNOTE You can create test setups in random order. This section describes it in the order ofthe test sequence.1. Create a new preset group.a. Click the My Favorite button on the EasyEXPERT main screen, and thenselect New.... A dialog box appears.b. Enter a name of the new preset group, and then click OK.The new preset group name is displayed under the My Favorite button.2. Create a test setup for initializing the ThermoStream.Create a test setup using the ThermoStream Initialize application test, and save itto the preset group created in Step 1.Application tests for temperature control belong to the Thermal category.3. Create a test setup for setting up the operation parameters of the ThermoStream.Create a test setup using the ThermoStream DefineParameters application test,and save it to the preset group created in Step 1.4. Create a test setup for controlling the temperature of the ThermoStream airflow.Create a test setup using the ThermoStream ControlTemperature application test,and save it to the preset group created in Step 1.The following example sets the target temperature to 25 °C and the temperatureslew rate to 60 °C/min.
