Keysight Technologies J7201A Operating And Service Manual

Contents

Keysight Technologies J7201A Operating And Service Manual Manual pdf 50 page image

6 Remote Operations50 Keysight J7201A/B/C Operating and Service ManualConfiguring the Remote InterfaceThis section briefly describes how to configure the GPIB, USB and LAN remote interfaces.Interface selectionYou can choose to control the J7201A/B/C remotely using either the GPIB, USB or LAN interfaces.For information on selecting and configuring the remote interface manually from the instrumentfront panel or remotely via virtual front panel, refer to Chapter 6, "Remote Operations".GPIB configurationEach device on the GPIB (IEEE- 488) interface must have a unique address. You can set theJ7201A/B/C address to any value between 0 and 30. The J7201A/B/C is shipped with a defaultaddress set to 28. The GPIB address is stored in non-volatile memory and does not change whenthe J7201A/B/C is switched off or after a remote interface reset.For information on setting the GPIB address manually via front panel operation, refer to“Connecting over GPIB” on page 82.NOTE For detailed information on remote interface connectivity configuration refer to the KeysightTechnologies USB/LAN GPIB Interfaces Connectivity Guide. If you have installed the IO LibrariesSuite, you can access the Connectivity Guide via the Keysight IO Libraries Control icon.Alternatively, you can access the Connectivity Guide via the Web at:www.keysight.com/find/connectivity.NOTE The latest version of Keysight IO Libraries Suite can be downloaded fromwww.keysight.com/find/iosuitedownload. The Keysight Instrument Control DVD, with the abovesoftware, is no longer shipped with Keysight instruments. If you require a Keysight InstrumentControl DVD, it can be ordered by contacting your local Keysight Customer Contact Center.NOTE It is expected that most users will use the front panel keys to set up the remote interfaces. Theremote interface commands are provided for completeness (for front panel operation).