Keysight Technologies J7201A Operating And Service Manual

Contents

Keysight Technologies J7201A Operating And Service Manual Manual pdf 82 page image

7 Remote Interface Configurations82 Keysight J7201A/B/C Operating and Service ManualConnecting the Remote Interface– You can find information and install this application via the Web atwww.keysight.com/find/iolib.Connecting over GPIB1 Make sure you have installed the required I/O software on your computer.2 Follow the instructions included with your GPIB interface card to install the GPIB hardware inyour computer.3 Connect the GPIB cable (not provided) between the computer and the J7201A/B/C.4 Make sure power is applied to your computer and verify that the operating system is fullybooted. Then, apply power to J7201A/B/C.5 Configure your GPIB hardware as instructed by the documentation provided by the hardwarevendor.6 Use the Connection Expert utility of the Keysight IO Libraries Suite to add the J7201A/B/C andverify a connection.7 The J7201A/B/C is shipped from factory with a default GPIB address of 28.To change GPIB addressChanging GPIB address (integer between 0 to 30):1 Navigate using rotary knob to IO icon as illustrated and press once on Menu/Enter button toselect.2 Default address of 28 appears once you are at GPIB ADDRESS screen.NOTE To easily connect the J7201A/B/C to your PC, configure and verify your connection, you can usethe Keysight IO Libraries Suite, the Keysight IO Libraries for Windows, or and equivalent.NOTE The procedures in this section is referring to the Keysight Technologies USB/LAN/GPIB InterfacesConnectivity Guide. If you have installed the IO Libraries Suite, you can access the ConnectivityGuide via the Keysight IO Libraries Control icon. Alternatively, you can access the ConnectivityGuide via the Web at www.keysight.com/find/connectivity.NOTE If you have installed any other I/O software, refer to documentation included with that software.