Keysight Technologies M9037A User Manual

Also see for M9037A: Startup guide Update guide

Contents

Keysight M9037A PXIe Embedded Controller User Guide 43Windows Configuration Review Using the ControllerAlways store your back up CDs/DVDs, hard drives, memory sticks, etc., in asecure place to prevent unauthorized access to your filesTo create a complete image backup of the SSD, perform the following stepsbefore running your image backup solution:1 Unhide the Keysight Recovery Partition. If you do not do this, it remainshidden and not included in the system image.a Click the Windows Start button.b Type CMD into the Search programs and files text box.c Press CTRL+SHIFT+ENTER. This is the keyboard shortcut allowing elevationto “Run as Administrator.”d In the DOS Command window, type: CD\ and press Enter.e In the DOS Command window, type: CD Keysight\Scripts. Press Enter.f Type: HideUnhideRecoveryPartition.vbs unhideg Press Enterh The Keysight Recovery Partition is now unhidden and should appear in theWindows File Explorer.i Close the DOS Command window.2 Connect a USB hard drive to the M9037A. Make certain that Windowsidentifies and can run the external hard drive. If you are using a LAN drive,make certain the LAN cable is connected to the M9037A.3 Run your system image backup solution.If you purchase a replacement SSD drive (or hard disc drive) froma vendor other than Keysight, it must be the same size or largerthan the original (240 GB) SSD in your M9037A. You cannot createa system image of one size of hard drive and then try to restore itto a smaller hard drive.Some third-party disk backup utilities may destroy the Keysightbackup partition. If this happens, the Keysight Recovery Systemwill not work. Follow the instructions provided on the followingpages carefully.The external drive must be formatted NTFS.