Keysight Technologies M9195A PXIe Startup Manual

Also see for M9195A PXIe: Startup guide

Keysight M9195A PXIe Digital Stimulus/Response Startup Guide 17Step 3: Install the SoftwareSoftware installation procedure1 Install the Keysight IO Libraries Suite from either the Keysight IO LibrariesSuite CD provided in your ship kit or get the latest from the web at:www.keysight.com/find/M9195A (go to Visit Technical Support > Drivers,Firmware & Software). Follow the installer prompts to install the IO libraries.2 Install the M9195A product software:a Using the Keysight M9195A PXIe Digital Stimulus/Response Software andProduct Information CD (M9195-10002), launch the installer.b When the Install Wizard starts, click the Next button.c Follow the installer prompts. Read and Accept the License Agreement.Click Next.d Choose a Complete installation to install all software and documentation.Click Next.e Click Install to begin the installation.3 Power Down the host PC and then the chassis if using a remote controller PC.Keysight IO Libraries Suite is required to run the DSR driversoftware, including the DSR Soft Front Panel.If you are using a remote controller, power order matters:• When powering down, first power down the PC (before the chassis)• When restoring power, first power up the chassis (before the PC)