Keysight Technologies N2750A User Manual

Contents

Keysight Technologies N2750A User Manual Manual pdf 16 page image

16 N2750/1/2A User’s Guide1 Using the ProbesInfiniiModeThe probes, when fitted with a socketed or solder-in tip, are InfiniiModecompatible. InfiniiMode allows you to switch between differential, single-ended,and common mode measurements without needing to change or reconnect theprobe or probe leads. The following table shows, depending on the probe tip andInfiniiMode setting, which signal types can be measured.NOTE Because the N2776A browser tip has two leads instead of three, it is notInfiniiMode compatible. However, you can still use the browser tip tomeasure single-ended signals by selecting differential mode and touchingone tip to ground.Table 4 Supported InfiniiMode Measurements by Probe TipInfiniiModeSettingSignal Being MeasuredSingle-Ended DifferentialDifferential Browser (full BW) aa Full bandwidth obtained by touching one tip to ground.Browser (full BW)Solder-In (lower BW) Solder-In (lower BW)Socketed (lower BW) Socketed (lower BW)Single-Ended Browser (not supported) Browser (not supported)Solder-In Solder-InSocketed SocketedCommon-Mode Browser (not supported) Browser (not supported)Solder-In Solder-InSocketed Socketed