Keysight Technologies N2750A User Manual

Contents

Keysight Technologies N2750A User Manual Manual pdf 7 page image

Using the Probes 1N2750/1/2A User’s Guide 7Oscilloscope CompatibilityThe probes are compatible with 9000 Series, 90000 Series, or 90000 Q/X-SeriesInfiniium oscilloscopes with software version 3.50 or above. Infiniium 90000Q/X-Series requires the N5442A adapter. The probes are compatible with3000X-series InfiniiVision oscilloscopes (one probe maximum connected tooscilloscope). The probes are also compatible with 4000X-series InfiniiVisionoscilloscopes (up to four probes connected to oscilloscope).BandwidthAs shown in the following table, the available probe bandwidth depends on theprobe model, attached probe tip, and type of signal probed. To learn about thesupplied probe tips, refer to “Exchangeable Probe Tips” on page 10.Table 1 Available Probe BandwidthSignal TypeBrowser ProbeTipSocketed ProbeTipSolder-In ProbeTipN2752A 6 GHz at 2:1 / 10:1Differential 6 GHz(7 GHz typical)3 GHz 2.5 GHzSingle-Ended 6 GHz(7 GHz typical)1.2 GHz 2 GHzCommon-Mode N/A 1 GHz 1.4 GHzN2751A 3.5 GHz at 2:1 / 10:1Differential 3.5 GHz 3 GHz 2.5 GHzSingle-Ended 3.5 GHz 1.2 GHz 2 GHzCommon-Mode N/A 1 GHz 1.4 GHzN2750A 1.5 GHz at 2:1 / 10:1Differential 1.5 GHz 1.5 GHz 1.5 GHzSingle-Ended 1.5 GHz 1.2 GHz 1.5 GHzCommon-Mode N/A 1 GHz 1.4 GHz