1 Quick Reference18 Keysight N6700 User’s GuideSCPI Command Description:PROTection:CLEar (@chanlist) Resets latched protection:COUPle Enables/disables channel coupling for protection faults:DELay , (@chanlist) Sets over-current protection programming delay:OSCillation , (@chanlist) Enables/disables output oscillation protection (N678xA SMU):WDOG[:STATe] Enables/disables the I/O watchdog timer:DELay Sets the watchdog timer delay:RELay:POLarity NORMal | REVerse, (@chanlist) Sets the output relay polarity (Option 760)SENSe:CURRent:CCOMpensate , (@chanlist) Enables/disables the capacitive current compensation[:DC]:RANGe[:UPPer] , (@chanlist) Selects the current measurement range:AUTO , (@chanlist) Enables/disables measurement autoranging (N6781A, N6782A, N6785A,:ELOG N6786A):CURRent[:DC]:RANGe[:UPPer] , (@chanlist) Sets the external data log current range:AUTO , (@chanlist) Enables/disables measurement autoranging (N6781A, N6782A, N6785A,N6786A):FUNCtion:CURRent , (@chanlist) Enables/disables external current data logging:MINMax , (@chanlist) Enables/disables external min/max current data logging:VOLTage , (@chanlist) Enables/disables external voltage data logging:MINMax , (@chanlist) Enables/disables external min/max voltage data logging:PERiod , (@chanlist) Sets the integration time of the external data logging:VOLTage[:DC]:RANGe[:UPPer] , (@chanlist) Sets the external data log voltage range:AUTO , (@chanlist) Enables/disables measurement autoranging (N6781A, N6782A):FUNCtion “VOLTage” | ”CURRent” | “NONE”, (@chanlist) Selects the measurement function (for backward compatibility):CURRent , (@chanlist) Enables/disables current measurements (replaces FUNCtion):VOLTage , (@chanlist) Enables/disables voltage measurements (replaces FUNCtion):INPut MAIN | AUXiliary, (@chanlist) Selects the voltage measurement input (only on N6781A, N6785A):SWEep (Sweep commands only on N676xA, N678xA SMU and Option 054):OFFSet:POINts , (@chanlist) Defines the trigger offset in the measurement sweep:POINts , (@chanlist) Defines the number of data points in the measurement:TINTerval , (@chanlist) Sets the measurement sample interval:RESolution RES20 | RES40, (@chanlist) Sets the measurement resolution:VOLTage[:DC]:RANGe[:UPPer] , (@chanlist) Selects the voltage measurement range:AUTO , (@chanlist) Enables/disables measurement autoranging (N6781A N6782A):WINDow[:TYPE] HANNing | RECTangular, (@chanlist) Selects measurement window (N676xA, N678xA SMU, Option 054)[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] , (@chanlist) Sets the output current:TRIGgered [:AMPLitude] , (@chanlist) Sets the triggered output current:LIMit[:POSitive][:IMMediate][:AMPLitude] , (@chanlist) Sets the positive current limit (only on N678xA SMU, N6783A):COUPle , (@chanlist) Sets the current limit tracking state (only on N678xA SMU):NEGative[:IMMediate][:AMPLitude] , (@chanlist) Sets the negative current limit (only on N678xA SMU, N6783A-BAT)
