4 Multimeter Setup Options124 Keysight U1273A/U1273AX User’s GuideUsing the Setup MenuThe multimeter’s setup menu allows you to change a number of nonvolatile presetfeatures. Modifying these settings affects the general operation of yourmultimeter across several functions. Select a setting to edit to perform one of thefollowing actions:– Switch between two values, such as on or off.– Cycle through multiple values from a predefined list.– Decrease or increase a numerical value within a fixed range.The contents of the setup menu are summarized in Table 4-2 on page 127.Table 4-1 Setup menu key functionsLegend DescriptionPress for more than 1 second to access the setup menu.Press and hold until the multimeter restarts to exit the setup menu.Press or to browse each menu page.Press or at each menu page to move the cursor to a specific menu item.Press to edit the selected menu item. The menu item’s value will flash to indicate that youcan now change the value shown.Press or again to switch between two values, to cycle through multiple values from a list, orto decrease or increase a numerical value.Press to save your changes.While the menu item’s value is flashing, press to discard your changes.SetupSetupSetupPeakMaxMinAutoRangePeakMaxMinAutoRangeExitDualSetupExitDualSetupHz % msLogHz % msLogExitDualSetupHz % msLogShiftViewEscShiftViewEsc
