Kiramek VISION 1440B Owner's Manual
                                            | |
Contents | 
5 © 2005-2014 KIRAMEK, INC.SYSTEM FEATURESDOOR TRIGGERThe siren will blast for 30 seconds when the door is opened while the sys-WHP LV DUPHG 9HKLFOH OLJKWV ZLOO ÁDVK LI VR LQVWDOOHG (You may disarmanytime with the vehicle’s factory remote.)IIP (Intelligent Ignition Protect)When you activate Remote Start Compatibility Mode,the 1440 uses a feature called “IIP” to automaticallyswitch back to IG Protect Mode when needed.Background. Most “remote start / turbo timer” compat-ible car alarms bypass all trigger inputs when the ignition goes on (whilearmed). If a thief opens the door the siren will go off, but the thief can thenclose the door, turn on the ignition and wait. When the siren stops, hecan drive away in silence because the Ignition-ON state prevents the sirenfrom going off again! Yet other car alarms trigger the siren when the igni-tion goes on (while armed), offering no remote start or turbo timer compat-ibility. IIP solves this “compatibility versus security” problem.IGNITION TRIGGERIG PROTECT MODE (default)The siren will blast for 30 seconds when the ignition switch is turned onZKLOHWKHV\VWHPLVDUPHG9HKLFOHOLJKWVZLOOÁDVKLIVRLQVWDOOHG(Youmay disarm anytime with the vehicle’s factory remote.)REMOTE START COMPATIBILITY MODE (user-selectable)When the ignition goes on while the system is armed, thesiren will not go off. Instead, shock sensor and ignition trig-gers are bypassed, while door and trunk triggers remain active.This allows a 3rd party remote start system to turn on the enginewithout triggering the 1440’s siren. The 1440 is still protecting the vehicle,so any attempt to open a door or the trunk will trigger the siren. And whenthe remote starter shuts down (i.e., ignition is turned off), the shock sensorand ignition triggers are automatically re-activated.ON STACCOFF |
Related manuals for Kiramek VISION 1440B
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine