K2_RM_EN_0.5 w w w . l - a c o u s t i c s . c o m 5 / 521 RIGGING SYSTEMThe system approach developed by L-ACOUSTICS® consists in providing packaged solutions for loudspeaker systemsin order to guarantee the highest and most predictable level of performance at any step: modeling, installation, andoperation. An L-ACOUSTICS® loudspeaker system is the set of components available to form any loudspeaker systembased on one of the full-range loudspeaker enclosures afforded by L-ACOUSTICS®. It includes enclosures, riggingaccessories, loudspeaker cables, amplified controllers and software applications.The main components involved in the rigging process of a K2 system are the following:1.1 Loudspeaker enclosureK2 Full range enclosure, deployable in a variable curvature line source.K1-SB Dedicated subwoofer enclosure, deployable with K2.1.2 Rigging elementsK2-CHARIOT Transport dolly for four K2 enclosures.K2-BUMP Rigging frame used to fly K2 line arrays. Designed to be compatible with K1 and K1-SB.Provided with two bow shackles WLL 3.25 t.K2-BAR Rigging bar designed to provide a wider range of site angles for the K2-BUMP.Provided with two bow shackles WLL 3.25 t.K1-DELTA Rigging plate designed to be used optionally with the K2-BUMP, to adjust the azimuth angleof flown K2 / K1 / K1-SB arrays.K2-BUMPFLIGHT Flight-case dedicated to the rigging elements of the K2 system.In order to be used as storage for the K2-BUMP it must be prepared using the foamsprovided with the product.K2-LINK Rigging interface between K2 and K1 or K1-SB.K2-RACKMOUNT Rigging interface for stacking one or two LA-RAK on top of a K2 array flown with a K2-BUMP.K2-BPCHAIN Adjustable sling used to prevent the chain bag of a climbing hoist being in front of a flownarray top enclosure.LA-SLING2T Chain sling with two-leg bridles used to implement bridle hangs.1.3 Software applicationSOUNDVISION Proprietary 3D acoustical and mechanical modeling software.1.4 AccessoriesK2-CHARIOTCOVProtective cover for transportation and storageOther K2 SYSTEM componentsAll the other components of the system are presented in the K2 user manual, document intended todescribe the enclosure configurations and connection scheme.