15EOLO - COMFORT 80ENCARATTERISTICHE VALORIThermal conductivity at medium temperature200 °C 0,07 W/mK400 °C 0,10 W/mK600 °C 0,14 W/mK800 °C 0,17 W/mK• If there are highly flammable objects (curtains, fitted carpet, etc...), all these distances must be furtherincreased with 1 meter.• If the floor is made up of flammable material two solutions are possible:• build a protection (steel plate, refractory, marble...) made up of no flammable material;• otherwise the insert must be raised at a minimum height of 200mm from the floor (adjusting legs' lenght).• If the walls are made up of flammable materials, check the safety distances (see Fig. 12 page 14).• At maximum power check that the wall temperature does not ever exceed 80°C. If it would be necessaryplease install a fire resistant plate on the concerned walls.• In some countries also masonring load-bearing walls are considered flammable.11.4 INSERT REMOVALIn case of settled on guides insert removal there is the risk of overturning!Disassembly operations must always be executed with the aid of 2 people!Fig. 13 - Retainers• Unhook the 2 yellow retainers (see Fig. 13 page 15) and extract half of the insert from its frame.Fig. 14 - Insert fixing front screw Fig. 15 - Insert fixing rear screw• Unscrew the 2 fixing screw on both insert sides, as shown in Fig. 14 page 15 and Fig. 15 page 15.