LA NORDICA EOLO Installation, Use And Maintenance Manual
                                                                                | |
Contents
| 
21EOLO - COMFORT 80EN• The plug must be easily accessible when the appliance is installed.• Please further assure you that your network is endowed with an efficient earth connection: if it does not existor if it is not efficient, please endow you with one in compliance with the law.• Connect the supply cable first on the back of the stove and then at a wall electric socket.• Do not use extension cables.• If the feeder cable is damaged, it must be replaced by an authorized technician.• When the stove is not going to be used for a long period of time, it advisable to remove the plug from thesocket on the wall.11.9 CONNECTION TO THE EXTERNAL THERMOSTATThe stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to anexternal room thermostat. This operation must be executed by an authorized technician.• External thermostat: "SET TEMP ROOM" a temperature which is round 7°C.• External chronothermostat: "SET TEMP ROOM" a temperature which is round 7°C and desable the chronofunctions from the menu 03-01 "CHRONO ENABLE" ("OFF").12 USE12.1 INTRODUCTIONTo have the best performance with the lowest consumption please follow the here descripted instructions.• The lightning of the pellets occurs very easily if the installation is correct and if the chimney flue is efficient.• Switch on the stove at Power 1 for at least 2 hours in order to enable the materials which make up the boilerand the fireplace to adjust the inner springing stress.• Oily plant waste and lacquers can cause smells and smoke during the first working hours: it is advisable toventilate the room because they could be noxious to people and animals.• By using the stove the varnish inside the combustion chamber could be subjected to alterations. Thisoccurrence can be attributed to different reasons: an excessive stove overheating, the presence of chemicalagents in bad quality pellets, bad chimney draught, etc. Therefore varnish endurance in the combustionchamber cannot be guarantee.Set values from 1 to 5 are defined by the manufacturer and they can be changed only byan authorized technician.12.2 CONTROL PANELPANEL ELEMENT DESCRIZIONEP1 e P2: when you are in set temperature mode the thermostat values increaseor decrease from min. 6°C to max. 40°C. Keeping pressed P2 you check the fumetemperature at outlet. Both have programming functions.P3: enables the access to temperature set and to User and Technician parametersmenu.P4: ignition and shut down, unblocking from probable alarms and exit from programming.P5 e P6: increase and decrease the calorific power from 1 to 5.Crono: activated time schedule. |
Related manuals for LA NORDICA COMFORT 80
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine