LSC STAGE DESK-16 User Instructions
            | |
Operation©LSC® www.lightstreamcontrols.com Stage Desk-16™ Instruction Manual Page 22While the power is on press and hold down Pattern Buttons 3, 6, 10, and15.Step 2: Wait approximately 30 seconds and turn the power back on. Thiswill delete all the chase patterns your programmed.Locking the Controller:Program Lock: This function allows you to lock the controller’s programfunction, preventing someone from changing or erasing valuable pro-grams. To lock the controller program settings:Step 1:Press and hold down the Step and Blackout Buttons simultaneously. Youwill notice the lock icon flashing on the left side of the LCD display, thisindicates the lock function may be set.Step 2:While holding down the Step and Blackout Buttons, use the ProgramButton to toggle between “ON” and “OFF” in the LCD display. Make yourselection and release the Program Button.Step 3:After you have made your changes release the Step and Blackout But-tons to return to normal operation.Manual Lock: This function allows you to lock the controller memory,prevent someone from changing or erasing valuable programs. To lockthe controller:Step 1:Press and hold down the Step and Blackout Buttons simultaneously. Youwill notice the lock icon flashing on the left side of the LCD display, thisindicates the lock function may be set.Step 2:While holding down the Step and Blackout Buttons, use the ProgramButton to toggle between “ON” and “OFF” in the LCD display. Make yourselection and release the Program Button.Step 3:After you have made your changes release the Step and Blackout But-tons to return to normal operation.Operation Cont.©LSC® www.lightstreamcontrols.com Stage Desk-16™ Instruction Manual Page 21LCD Display Value Shift:This function changes the LCD values from percentage to DMX value.0~100 will equal percentage and 000~255 will equal DMX value. Tochange the way the LCD displays the value:Step 1:Shut down the main power and press and hold down built-in patternbuttons 5, 6, 7, and 8.Step 2:While holding down the pattern button, turn the main power back on.This will enter the set-up mode.Step 3:You will notice that Pattern Button LEDs 1, 2, 3, and 4 have turn on.Press Button 3 for percentage or 4 for DMX values.Step 4:When you have made your selection press the Blackout Button twice tolock this setting in to memory and return to normal operation.Remote Control:On the rear of the unit there is a connection for a remote control, thisremote is a wired foot switch. This remote has been designed with aband in mind. The remote allows you hand-off control over two of the keyfunction of the controller Full On and Stand -By (Blackout).Full On: This function will bring all the slider channels to full output.Stand-By: This function will shut down all slider channel output. Duringstand-by mode the chase patterns will continue to run in the background. Full-on function will override the controller when it is in stand-bymode.Initializing to Default Settings:This function will erase all your preset programs and scenes. The built-inchase patterns will not be effected. Caution! This function is irrevers-ible and the chase patterns can not be recovered once the memory iserased. To erase the controller memory:Step 1: |
Related manuals for LSC STAGE DESK-16
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine