LSC STAGE DESK-16 User Instructions
            | |
Manual or Blackout Buttons.14. Audio Button -This button will activate audio mode, which will sync a chase operationwith the beat of an audio source.15. Tap Sync Button -This button is used to manually establish a chase rate. The chase rate willsynchronize to rate you tap on the Tap Sync Button, tap the button twicea second and the chase will advance two steps every second. Setting theTap Sync will override any previous chase rate settings.16. Step Button -This button gives you manual control over any running chase. Pressingthis button will advance the chase pattern one step. This function will workin conjunction with the audio and tap sync functions, so be sure to lowerthe audio sensitivity and turn off the tap sync function to have full controlover the chase patterns. This will also activate the lock function whencombined with the BLACKOUT BUTTON.17. Dark Button -This button provides a temporary black out function. When you hold downthis button all channel output will cease, until the button is released.Please note that any chase running will continue to run in the background, so a chase may not be at the same step as it was when the DARKbutton was initially pressed.18. Full On Button-Holding this button down will momentarily bring all 16 channels to fulloutput. This function will only work as long as the button is held down. Thisfunction will function under any operating mode.19. Blackout Button -This button functions as a blackout and is also used to clear any currentoperating mode. Holding this button down for over a second will bypassthe fade function. This will also activate the lock function when combinedwith the STEP BUTTON.20. Audio Level Slider -This button controls the amount of audio sensitivity a chase will react towhen the “Audio” function is selected.Controls & Functions Cont.©LSC® www.lightstreamcontrols.com Stage Desk-16™ Instruction Manual Page 91. Channel LED’s -These 16 LED’s display the current intensity of each channel.2. Channel Sliders -These 16 serve two functions: 1) They function as channel dimmers. 2)They activate the programmed assigned to it’s respective channel.3. Flash Buttons -These 16 buttons serve two functions: 1) In program mode these buttonsare used to record it’s respective channel into a program 2) In manualmode these button are used to turn on a channel to full intensity.4. Pattern LED -These 16 LEDs indicate channel activity for their respective channel but-tons.5.Pattern Buttons -The 16 pattern buttons activate the user programmed scenes or chasepatterns. You may program a static scene or a chase into each one ofthese 16 pattern banks.6. Built-in Pattern LEDs -These green LEDs indicate activity of the respective pattern button.Controls & Functions Cont.21. Speed Slider -This slider controls the speed a chase will advance from step to step.22. Fade Time Slider -This slider adjust the initial fade time for the different operating modes.Fade time will increase as the slider is position from 0 to 10, 10 giving themaximum possible fade time. Fade time ranges from instant to33 34Rear Panel:©LSC® www.lightstreamcontrols.com Stage Desk-16™ Instruction Manual Page 10 |
Related manuals for LSC STAGE DESK-16
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine