La Gard 3000 Installation Instructions Manual
Also see for 8130: Installation instructionsManualInstallation instructionsUser operating instructions
             | |
(P/N)762.128 Rev E • 08/15 © copyright 2009-2015 Kaba Mas LLCpage 8SWING BOLT1. Mount the dial plate (p/n 3752) centered on the through hole (Figure 6). Attach the dial plate with thetwo mounting screws US 8-32 (US) or the M4-0.7 (metric).2. Slide the bearing plate (p/n 2674) over cable and press onto the fasteners on theEntry Device (Figure 7).3. Feed the key pad cable through the spindle cable hole from the front of the safe door.4. Insert the two springs (p/n 2893) and blocking pins (p/n 2894) into the holes located on theback of the keypad (Figure 8).5. Rotate the key pad approx. 30° counter-clockwise and place keypad bushings intothe large openings on the dial plate. Then turn the key pad clockwise until theblocking pin clicks, and secures the Entry Device to the safe door.WARNING: Once installed, the Entry Device cannot be removed from the safe door without causingphysical damage to the Entry Device.6. When installing the lock, ensure that the Entry Device cable is running through thechannel at the back of the lock. Refer to lock installation instructions which areavailable at www.kaba-mas.com.3750, 3750-K, 3750KE, 3190 AND 4750 ENTRY DEVICE3750, 3750-K3190Swing BoltMounting ScrewsPins & Springs Insert Springs & PinsFigure 6 Figure 7 Figure 8 |
manualsdatabase
Your AI-powered manual search engine