Lab.gruppen PLM Series PLM 10000Q User Manual Addendum

Also see for PLM 10000Q: Supplementary guide Specifications Quick start Technical data Operation manual

Lab.gruppen PLM Series PLM 10000Q User Manual Addendum Manual pdf 6 page image

6 Dolby Lake Controller User Manual PLM Edition Addendum3 soFtware installationThe user wants to keep two different versions of▸the Dolby Lake Controller, for example version5.0 and 5.1.The user wants to keep separate installations▸with different patches to the software, as couldbe the case when the version is the same butthe build number has increased.The user wants to keep separate user files for▸the two installations.See section 3.4 for installation instructions.3.2 first-time installationThis procedure is simple and straightforward. Followthe procedure for installation as given in the DolbyLake Controller User Manual, Chapter 2.3.3 Overwriting Existinginstallation with pLm EditionOverwriting an existing installation requires that boththe Installation and Shortcut folders be identical to thoseof the existing installation. Follow this procedure:Initiate the installation procedure, and follow the▸first three steps of the Installation Wizard. AtStep 4 (Installation Folder selection), specify adestination location (pathname) identical to thatof the existing software.At Step 5 (Shortcut folder) enter a Shortcut name▸for the start menu folder that is identical to theone already in use.3.4 parallel installation: DLC pLmEdition alongside ExistingDolby Lake ControllerParallel installation requires that both the newInstallation and new Shortcut folders differ from thoseof the existing installation. Follow this procedure:To complete the installation options here, you may alsoneed to refer to the Dolby Lake Controller User Manual,chapter 2, for comprehensive instructions on:Configuring your Tablet PC for working with the▸Dolby Lake Controller PLM Edition softwareInstalling the Dolby Lake Controller PLM Edition▸application on your Tablet PCSetting up a wired control network▸Setting up a wireless control network▸3.1 installation OptionsThree installation options are available for the DolbyLake Controller PLM Edition software. The preferredtype of installation depends on the needs of the userand any prior installations of Dolby Lake Controller.first-time installationThis option is for users who are installing Dolby LakeController (any version) on the computer for the firsttime. Note that the Dolby Lake Controller PLM Editionsoftware can control any existing Dolby Lake Processorunits (or legacy Dolby Lake products) as well as thePLM units. See section 3.2Overwriting existing Dolby Lake Controller withnew Dolby Lake Controller pLm EditionThis option is for users who already have Dolby LakeController installed on the computer and wish toadd the PLM Extension. The combined installationcan control both PLM units and existing Dolby LakeProcessors (or legacy Dolby Lake products). Any addeduser files will remain in the installation and can beused from within the combined installation. It is notrecommended to overwrite an installation that doesnot have the same base DLC version, for example 5.0.See section 3.3 for installation instructions.parallel installation of Dolby Lake ControllerpLm Edition alongside any existing Dolby LakeControllerThis option is for users who wish to keep separateinstallations of the Dolby Lake Controller on the samecomputer. This is the preferred installation optionwhen:The user wants to keep Dolby Lake Controller and▸Dolby Lake Controller PLM Editions separate.