Labconco SteamScrubber 44003 Series User Manual
Also see for 44003 Series: User manualService – technical manualUser manual
                                                                        | |
Contents
| 
Product Service 1-800-522-765832CC HHAAPPTTEERR 55MM AAIINNTTAAIINNIINNGG YY OOUURR WW AASSHHEERRUnder normal operation, your Glassware Washer will require little routinemaintenance to keep it functioning properly.Maintaining the Stainless Steel InteriorThe interior of your Glassware Washer is type 304 stainless steel. Never usemetal scouring pads on the stainless steel interior. Metal scouring pads canscratch or leave metal chips that will rust.To maintain the appearance and quality of the stainless steel interior, perform thefollowing tasks as needed:• Wipe the outer edges on the inside door panel to remove particles andresidue that occur during loading.• Use a sponge sprinkled with non-abrasive stainless steel cleaner to gentlywipe the washer tank and door to remove surface discoloration caused byexposure to halogenated compounds or steel parts. In some cases, thefinish may be slightly dulled by this action.If your water has a high mineral content, film or spots may develop on the washerinterior. If the procedures listed above do not eliminate the film or spots, youmay run your washer through the special cycle below.To remove film or spots from the washer interior:1. Remove all glassware from the washer.2. Choose the Glass Program, Steam OFF, Pure Rinse OFF, and set the dryingtime to zero. |
Related manuals for Labconco 44003 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine