LIGHT ALARM SWITCHI (Fig. 35) – neutral position.Dipped beam is on if headlight beamis switched on with the exterior lightswitch.II – left turn indicators are on.Non-fixed position.III – left turn indicators are on.Fixed position.IV – right turn indicators are on.Non-fixed position.V – right turn indicators are on.Fixed position.VI – pull, light signalling. Mainbeam is on, regardless of the posi-tion of the exterior light switch. Non-fixed position.VII – push, main beam is on, ifheadlight beam is switched on withthe exterior light switch. Fixed posi-tion.WIPER SWITCHWindshield wipers are turned onby changing the key in the ignitionstarter switch to position I.I (Fig. 36) – neutral position.Window wipers and washers are off.II – intermittent operation ofthe windshield wiper is on. Non-fixed position.III – intermittent operation ofthe windshield wiper is on. Fixedposition.IV – low speed of the windshieldwiper is on. Fixed position.V – high speed of the wind-shield wiper is on. Fixed position.VI – pull, windshield washer ison. Non-fixed position.VII – push, rear window wiper ison. Fixed position.VIII – push, rear window wiperand washer are on. Non-fixed posi-tion.In the intermittent operation thewiper moves its blades once per sev-eral seconds at a constant interval,regardless of whether there aredrops on the windshield.In the design variant the vehicleis equipped with automatic controlsystem of the windshield wiper(cleaning system), which allows oneto switch on and off the wiper auto-46Fig. 35. Light alarm switch lever Fig. 36. Wiper lever