697 Operation7.5.3 Resetting the factory settings (up load)WARNING!Checking the switch-off parametersThere is a risk of death and serious injury. The preset switch-off parameters are to be verified through switch-off tests, (see Section6.4.5 Switch-off Test). The change of the trigger threshold, the gain of the weighting (UV/IR) and/or the frequency setting affects the switch-off parameters and therefore requiresrenewed switch-off test.Data (UI) to be loaded from the user interface (in thiscase factory parameters for the active mode and thesafety time of FFDT 1 second)Data (line 1) – loaded from user interfaceData (line 2) – received from the F300KThe data in line 1 must match the data in line 2.A countdown of 8 seconds begins. This is accompa-nied by flashing. During this countdown, you have toconfirm the setting by pressing . If you do not, anerror message appears and the setting is rejectedThe transfer was successful.
