707 OperationNOTICEThe active operating mode parameters* for the switch-on and switch-off operation are reset tothe LAMTEC factory settings in the flame scanner for the current safety time.This involves a precision setting for the detection of the flame and is a good way to start whenputting the flame scanner into operation.* Operating mode parameters = learned or manually set parameters for the operation of theF300K7.5.4 Save parameters (down load)NOTICEThe device parameters that currently exist in the flame scanner and all of the operating modeparameters are copied to the level of the operating unit. Flame scanner parameters at the level of the operating unit are overwritten without a re-quest for confirmation.Saving device and operating parameters at the level of the operating unitThe data has been successfully saved.
