Landice Cardio Owner's Manual

Landice Cardio Owner's Manual Manual pdf 4 page image

iiIMPORTANT SAFETY INSTRUCTIONS[1] An appliance should never be left unattended when plugged in. Unplug from outlet when not in use.[2] Close supervision is necessary when this unit is used by or near children or disabled persons.[3] Use this treadmill only for its intended use as described in this manual.[4] Never operate this treadmill if it has a damaged cord or plug, if it is not working properly, or if it has beendamaged. Call your selling dealer immediately for examination and repair.[5] Keep the power cord away from heated surfaces. Be sure the line cord has plenty of slack and does not getpinched underneath the treadmill when it elevates and de-elevates.[6] Never operate the treadmill with the motor cover air openings blocked. Keep the air openings free of lint,hair, and dust.[7] Never drop or insert any object into any opening. Be sure no objects are near or underneath the moving treadbeltwhen you are using the treadmill.[8] Do not use outdoors.[9] Do not operate where aerosol (spray) products are being used or where oxygen is being administered.[10] Connect this appliance to a properly grounded dedicated outlet only.[11] To disconnect, press the STOP button, remove the Safety Key, and unplug the unit from the wall outlet.GROUNDING INSTRUCTIONSThis product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance forelectric current to reduce risk of electric shock. This product is equipped with a cord that has an equipment groundingconductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded inaccordance with all local codes and ordinances.120 VOLT TREADMILLSTreadmills marked 120 VAC are intended for use in a nominal 120-volt circuit with a grounding plug. Make sure the productis connected to an outlet having the same configuration as the plug. No adapter should be used with this product.200 - 250 VOLT TREADMILLSTreadmills marked 200-250 VAC are intended for use on a circuit having a nominal rating more than 120V and are factory-equipped with a specific cord and plug to permit connection to a proper electric circuit. Make sure the product is connectedto an outlet having the same configuration as the plug. No adapter should be used with this product. If the product must bereconnected for use on a different type of electric circuit, qualified service personnel should make the reconnection.NOTE: Using a Ground Fault Interrupter (GFI) or Arch Fault Circuit Interrupter (AFCI) outlet may create unusualelectronic interference.DANGER: Improper connection of the equipment-grounding connector can result in a risk of electric shock.Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Donot modify the plug provided with the product. If it will not fit in the outlet, have a proper outlet installed by a qualifiedelectrician.WARNING: To reduce the risk of electric shock or injury to persons: