Landice L7 Service Manual

Also see for Cardio Trainer L8: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

Landice L7 Service Manual Manual pdf 92 page image

Repair Procedures Elevation Assembly Wheels925. Lubricate as follows with Lubriplate white lithium grease (Landice item #71061 with a small brush:• Both ends of the impact absorbers• The bottom of the nylon spacer• The entire shaft of the post but not the threads6. Do one of the following:• For L7 models: Place all absorbers and load washers in position on the slats, insert the post and thread it intothe slat.• For L8 and L9 models: Install the post and nylon spacer. Install the greased impact absorber and load washeron all posts.7. Use the locking pliers to tighten the posts into the slats securely, 1/4 turn past snug.8. Install the deck, see “Deck and Treadbelt” on page 90.7.22. Elevation Assembly Wheels1. Block the treadmill up on a stable platform such as a 4” x 4” x 36” piece of wood as shown in the following figure.Figure 7-28. Elevation Assembly Wheel2. Remove the hitch pin and then slide out the axle, the wheel will drop out.3. Installation is the reverse of removal.WoodensupportHitch pinWheelAxle