Setting Originals343Placing the Original on the Exposure GlassOriginals which do not fit into theADF, such as sheets with glued-onparts, books, etc., can be placed di-rectly on the exposure glass for scan-ning.Note❒ For information about the origi-nals which can be placed on the ex-p o s u r e g l a s s , s e e t h e C o p yReference manual.A Lift the exposure glass cover orthe ADF.Note❒ Raise the exposure glass coveror ADF fully (more than 30 de-grees). The opening/closing ac-tion triggers the automaticoriginal size detection process.B Place the original on the exposureglass with the side to be scannedfacing down. Align the far leftedge of the original with the mark.There are two original orienta-tions. Either orientation can beused for placement.A Place the original so that thetop edge touches the rear of theexposure glass.B Place the original so that thetop edge touches the top left ofthe exposure glass.When using the machine as anetwork TWAIN scanner, thisorientation is standard settingin the TWAIN driver. Normal-ly, use this orientation for set-ting.C Close the exposure glass cover orthe ADF.D Select the original orientation ac-cording to the setting orientation.Reference⇒ p.37 “Original Orientationand Scan Area Setting”
