Lanier 5622 Operator's Manual
Also see for 5622: Operator's guide
                                                                                        | |
Contents
| 
435. Delivering Stored Scan Data bythe Network Delivery ScannerStored scan data can be sent to a specified destination using the network deliv-ery scanner function. This chapter explains the various display screens, deliveryprocedures, and checking of the delivery result when this function is used.Note❒ A delivery server in which ScanRouter V2 Lite/Professional is installed isnecessary to use the network delivery server function. Information about de-livery destinations and senders must be programmed first into the deliveryserver. Also, program a connected device in [Set I/O Device] of ScanRouter V2Administration Utility. For more information, see ScanRouter V2 Adminis-tration Utility Help.List Displays of Destinations and SendersThe display configuration when using the machine as network delivery scanneris as follows:1. [Update Address]Press this key to obtain destination infor-mation from the delivery server and up-date the display. If the destination ischanged in the delivery server, press thekey to update the display.2. Destination DisplayThe selected destination is shown here. Ifseveral destinations are selected, the se-lected destinations are displayed in orderby pressing [UUUUPrev.] or [TTTTNext].Note❒ Pressing the {Check Settings} key letsyou verify the selected destinations.3. [Number Keys]Use these to specify a destination usingthe 3-digit short ID number.4. [Attach Sender’s Name] [Attach Sub-ject]Sets the sender and subject of the deliv-ered document.5. [Clear]Pressing this key clears a selection in theDestination List or a short ID number en-tered.452631 |
Related manuals for Lanier 5622
manualsdatabase
Your AI-powered manual search engine