Lanier 5622 Operator's Manual
Also see for 5622: Operator's guide
                                                                                        | |
Contents
| 
Scanning Originals Using Network TWAIN Scanner404Scanning OriginalsThis section explains the method for scanning a single original following p.39“Flow of Operations”.A Start up DeskTopBinder V2 Lite and select the driver of the scanner.A Click [Start], point to [Program], and then [DeskTopBinder V2] from [DeskTop-Binder V2].DeskTopBinder V2 Lite starts up.B Click [Scanner Settings] from the [Tools] menu.The [Scanner Settings] dialog box appears.If the scanner is already selected, no scanner settings are necessary. Check[File format for scanned image(s)] and go to step E.C Click [Select Scanner Driver].The [Select Source] dialog box appears.D Click the machine name you want to use in the list, and then click [Se-lect].E Click [OK].The [Scanner Settings] dialog box closes.B Place the original in the scanner.Reference⇒ p.33 “Setting Originals”C Make the scan settings.A From the [File] menu, point to [Add Document], and then click [Scan].The TWAIN driver starts up.After a short while, the dialog box of the TWAIN driver that operates thescanner appears. This dialog box is called the Scanner Control dialog box.Note❒ The title bar displays the scanner currently being used. When multiplemachines are connected, confirm that the indicated machine name is themachine to be used. If the intended machine is different, click [SelectSource] to select the scanner again.❒ If the machine to be used does not appear in the list, make sure that theIP address is configured and that the machine is correctly connected tothe network. If the driver is still not displayed in the list after the aboveoperations, consult with your network administrator. |
Related manuals for Lanier 5622
manualsdatabase
Your AI-powered manual search engine