Lantronix PremierWave User Manual

Also see for PremierWave: Quick start guide Quick start

Contents

Lantronix PremierWave User Manual Manual pdf 46 page image

5: Network SettingsPremierWave® EN Embedded System on Module User Guide 46Using the CLI To enter the wlan0 profile advanced command level: enable -> config -> wlanprofiles -> edit name or number> -> advancedUsing XML Include in your file: name=”wlan profile” instance=”profile name”>and name=”security”>WLAN Profile Security SettingsThe PremierWave EN system on module supports WEP, WPA, and WPA2/IEEE 802.11i to secureall wireless communication. WPA and WPA2/IEEE 802.11i are not available for Adhoc topology.The WPA2/IEEE 802.11i mode is compliant with the Robust Secure Network specified in the IEEEstandard 802.11i.Table 5-17 WLAN Profile Security SettingsWLAN ProfileSecurity SettingsDescriptionSuite Specify the security suite to be used for this profile. None = no authentication or encryption method will be used. WEP = Wired Equivalent Privacy WPA = Wi-Fi Protected Access WPA2 /IEEE 802.11i = Robust Secure Network.Authentication Select the authentication of the security key when the WPA or the WPA2/IEEE802.11i suite is selected above. PSK IEEE 802.1X- OR -Select the authentication of the security key when the WEP suite is selectedabove. Open SharedKey Type Select the desired key type.Note: This configuration option becomes available only when suites, WEP, WPAor WPA2/IEEE 802.11i are selected.Key Size Select the key size: 40 bits 104 bitsNote: This configuration option becomes available only when the WEP suite isselected.Key Enter the key.Note: This configuration option becomes available only when the WPA or theWPA2/IEEE 802.11i suite and the Hex key type is selected.